Motion Capture Pillow (MCP): A novel method to improve comfort and accuracy in radiotherapy

The delivery of radiotherapy has changed signi?cantly over the last few decades. Recent advances in radiotherapy practice may increase patient discomfort. A key challenge to improve patient comfort is the common use of a thermoplastic mask for patients with head and neck cancers. Patients suffer from discomfort and the claustrophobic effect of the mask, or as they lose soft tissue due to treatment and gain undesirable movement in the mask. A prototype system using a robotic motion capture pillow (MCP) is investigated for proof-of-concept and is pictorially presented for the potential replacement of thermoplastic masks

Development of a novel robotic system for hand rehabilitation

Rehabilitation Robotics involves the use of robotic systems as an enabling technology for people with kinetic problems, in order to help them recover from a physical trauma. This paper presents the investigation of a robotic system for stroke and post hand-surgery patient rehabilitation, in order to gradually regain flexibility in their finger-joints by passively extending and flexing their fingers. It includes one linear actuator for each finger and a thin-film force sensor at each fingertip as a safety measure against overstraining the finger-joints. Prior to designing the system, kinematic and dynamic models of a human hand have been derived and simulated in MATLAB. Data obtained from this model show a strong correlation to natural human hand movements, recorded in this study using a 6 DoF motion capture system. Design of the robotic system is performed using UGS NX6 software. © 2011 IEEE

Towards tactile sensing applied to underwater autonomous vehicles for near shore survey and de-mining

Artificial tactile whisker sensors demonstrate an approach to localisation [1] that is robust to harsh environmental disturbances, endowing autonomous systems with the ability to operate effectively in confined, noisy and visually occluded spaces, such as collapsed buildings or mine shafts, where conventional sensors become unreliable [2]. Marine engineering applications could benefit from such tactile sensors due to the lack of robust underwater close proximity sensing techniques. Animals such as walruses, seals and manatees all have exquisitely sensitive whiskers, which they use for hunting and foraging. Building upon a recent pilot study in underwater tactile sensing [3], we present the motivation for further research and our work plans toward a demonstrator platform for near shore survey and demining. © 2012 Springer-Verlag

Design of a wearable fingertip haptic device for remote palpation: Characterisation and interface with a virtual environment

© 2018 Tzemanaki, Al, Melhuish and Dogramadzi. This paper presents the development of a wearable Fingertip Haptic Device (FHD) that can provide cutaneous feedback via a Variable Compliance Platform (VCP). The FHD includes an inertial measurement unit, which tracks the motion of the user's finger while its haptic functionality relies on two parameters: pressure in the VCP and its linear displacement towards the fingertip. The combination of these two features results in various conditions of the FHD, which emulate the remote object or surface stiffness properties. Such a device can be used in tele-operation, including virtual reality applications, where rendering the level of stiffness of different physical or virtual materials could provide a more realistic haptic perception to the user. The FHD stiffness representation is characterised in terms of resulting pressure and force applied to the fingertip created through the relationship of the two functional parameters - pressure and displacement of the VCP. The FHD was tested in a series of user studies to assess its potential to create a user perception of the object's variable stiffness. The viability of the FHD as a haptic device has been further confirmed by interfacing the users with a virtual environment. The developed virtual environment task required the users to follow a virtual path, identify objects of different hardness on the path and navigate away from "no-go" zones. The task was performed with and without the use of the variable compliance on the FHD. The results showed improved performance with the presence of the variable compliance provided by the FHD in all assessed categories and particularly in the ability to identify correctly between objects of different hardness

Preliminary analysis of force-torque measurements for robot-assisted fracture surgery

© 2015 IEEE. Our group at Bristol Robotics Laboratory has been working on a new robotic system for fracture surgery that has been previously reported [1]. The robotic system is being developed for distal femur fractures and features a robot that manipulates the small fracture fragments through small percutaneous incisions and a robot that re-aligns the long bones. The robots controller design relies on accurate and bounded force and position parameters for which we require real surgical data. This paper reports preliminary findings of forces and torques applied during bone and soft tissue manipulation in typical orthopaedic surgery procedures. Using customised orthopaedic surgical tools we have collected data from a range of orthopaedic surgical procedures at Bristol Royal Infirmary, UK. Maximum forces and torques encountered during fracture manipulation which involved proximal femur and soft tissue distraction around it and reduction of neck of femur fractures have been recorded and further analysed in conjunction with accompanying image recordings. Using this data we are establishing a set of technical requirements for creating safe and dynamically stable minimally invasive robot-assisted fracture surgery (RAFS) systems

Towards an anthropomorphic design of minimally invasive instrumentation for soft tissue robotic surgery

Minimally invasive procedures, such as laparoscopy, have significantly decreased blood loss, postoperative morbidity and length of hospital stay. Robot-assisted Minimally Invasive Surgery (MIS) has offered refined accuracy and more ergonomic instruments for surgeons, further minimizing trauma to the patient [1]. On the other hand, training surgeons in minimally invasive surgical procedures is becoming increasingly long and arduous [2]. In this paper, we outline the rationale of a novel design of instruments for robotic surgery with increased dexterity that will provide more natural manipulation of soft tissues. The proposed system will not only reduce the training time for surgeons but also improve the ergonomics of the procedure. © 2012 Springer-Verlag

An anthropomorphic design for a minimally invasive surgical system based on a survey of surgical technologies, techniques and training

© 2013 John Wiley & Sons, Ltd. Background: Over the past century, abdominal surgery has seen a rapid transition from open procedures to less invasive methods, such as robot-assisted minimally invasive surgery (MIS). This study aimed to investigate and discuss the needs of MIS in terms of instrumentation and to inform the design of a novel instrument. Methods: A survey was conducted among surgeons regarding their opinions on surgical training, surgical systems, how satisfied they were with them and how easy they were to use. A concept for MIS robotic instrumentation was then developed and a series of focus groups with surgeons were run to discuss it. The initial prototype of the robotic instruments, herein demonstrated, comprises modular rigid links with soft joints actuated by shape memory alloy helix actuators; these instruments are controlled using a sensory hand exoskeleton. Results: The results of the survey, as well as those of the focus groups, are presented here. A first prototype of the system was built and initial laboratory tests have been conducted in order to evaluate this approach. Conclusions: The analysed data from both the survey and the focus groups justify the chosen concept of an anthropomorphic MIS robotic system which imitates the natural motion of the hands